Foam Roof Restoration with Elastomeric Acrylic Coating and Entry Tile Repair in Paradise Valley, AZ

A property owner in Paradise Valley, Arizona chose to restore an aging foam roof system that was showing visible cracking, oxidation, and surface wear. This was an out-of-pocket retail project with no insurance claim or lender involvement, focused on renewing the roof surface, improving long-term protection, and addressing broken entry tiles without the cost of a full roof replacement.

The project covered a 60-square roof system (approximately 6,000 sq. ft.) and included power washing, minor foam repairs, broken entry tile replacement, and a multi-coat Polycon elastomeric acrylic coating system applied across the existing foam surface — with careful detailing around roof edges, penetrations, parapet areas, and transitions.

Project Details

• Roof type: Foam roof with tile roofing at the entry
• Roof size: 60 squares (approximately 6,000 sq. ft.)
• Roofing system: Foam roof restoration with Polycon elastomeric acrylic coating
• Additional work: Broken tile replacement at the entry
• Insurer: None — out-of-pocket retail project
• Lender: None
• Location: Paradise Valley, AZ
• Labor warranty: 10-year workmanship warranty

Problem: Cracked Foam Roofing and Tile Damage Needed Careful Restoration

The foam roof had areas of cracking, dirt buildup, debris, and oxidation that needed to be corrected before a new coating system could perform properly. Surface cracks and worn coating areas required repair prior to the final application.

The property also included tile roofing near the entry, where broken tiles needed to be replaced. Because the home had multiple roof surfaces and detailed parapet areas, the work required careful preparation, cleaning, and coating around roof edges, penetrations, and transitions to deliver a continuous, reliable finished surface.

Solution: Polycon Elastomeric Acrylic Coating Renewed the Roof Surface

Our crew restored the foam roof with a multi-coat Polycon elastomeric acrylic system designed to protect the existing surface and extend its service life. Before coating, the roof was power washed to remove dirt, debris, and oxidation so the new system could bond properly, and minor repairs were completed where cracking and surface wear were visible. The broken entry tiles were replaced to improve both the appearance and function of the tile area.

Once the roof was prepared, the team applied an elastomeric acrylic base coat at 1 gallon per 100 sq. ft. with back rolling for adhesion, followed by an interim coat at 1 gallon per 100 sq. ft. and a top coat at 1.5 gallons per 100 sq. ft. for added protection. The completed restoration is backed by a 10-year workmanship warranty.

Result: A Cleaner, Brighter, More Protective Foam Roofing System

The finished roof gave the Paradise Valley property a renewed protective surface with improved durability against sun exposure, cracking, and future wear. The bright elastomeric coating refreshed the appearance of the roof while supporting better long-term performance, and the entry tile replacement addressed both protection and curb appeal.

For the property owner, the result was more than a cleaner roof. By restoring the existing foam system instead of replacing it, the project delivered a practical, cost-effective solution — along with peace of mind, confidence in the restored roofing system, and pride in protecting a distinctive desert home with a system built for long-term performance and backed by a 10-year workmanship warranty.