Elastomeric Acrylic Foam Roof Recoat With Skylight Repair in Phoenix, AZ

A homeowner in Phoenix, Arizona moved forward with a self-pay foam roof recoat after the existing flat roof surface showed signs of wear, staining, exposed repair areas, and aging coating. This was a retail project with no insurance claim or lender involvement, focused on restoring protection and extending the life of the existing foam roofing system without a full replacement.

The project covered 25 squares (approximately 2,500 sq. ft.) and included power washing, noted repairs, skylight area restoration, and a two-coat Elastomeric Acrylic coating system — with careful attention around skylights, an HVAC curb, roof penetrations, and shingle-to-flat-roof transitions.

Project Details

• Roof type: Residential flat foam roof
• Roof size: 25 squares (approximately 2,500 sq. ft.)
• Roofing system: Elastomeric Acrylic foam roof coating system
• Additional work: Skylight area repair
• Insurer: None — self-pay retail project
• Lender: None
• Location: Phoenix, AZ
• Labor warranty: 5-year warranty

Problem: Aging Foam Roof Coating With Skylight and Transition Details

The existing foam roof had visible surface wear, stained areas, and worn coating that needed attention before the roof could be properly recoated. Multiple rooftop details added complexity, including skylights, an HVAC curb, roof penetrations, shingle-to-flat-roof transitions, and older repair patches that required careful preparation.

For a Phoenix home, a foam roofing system must stand up to intense, year-round sun exposure and the surface changes that develop over time. The challenge was to clean and repair the existing roof, address the skylight area, and apply a new coating system that could restore dependable protection across every transition and penetration without replacing the entire roof.

Solution: Elastomeric Acrylic Recoat for a Renewed Foam Roofing System

SUNVEK began by power washing the roof to remove dirt, debris, and oxidation so the new coating could bond properly. The crew made noted repairs across the worn areas and restored the skylight area as part of the roof service, then paid close attention to preparing the HVAC equipment, roof penetrations, and shingle-to-flat-roof transitions for consistent coating coverage.

Once the surface was clean and repaired, the team applied an Elastomeric Acrylic base coat at the specified coverage rate and back-rolled it for consistent adhesion, followed by an Elastomeric Acrylic top coat to complete the renewed foam roofing system. The completed recoat is backed by a 5-year warranty.

Result: Restored Roof Protection and a Cleaner Finished Surface

The completed recoat gave the homeowner a refreshed foam roof surface with improved protection and a cleaner appearance. By recoating the existing system, the project helped reinforce the roof against continued surface wear while supporting better long-term durability in Phoenix’s demanding desert climate.

The project also gave the property owner confidence that key details — the skylight area, visible repair spots, HVAC curb, and shingle-to-flat transitions — had all been properly addressed. The result was a practical, cost-effective roofing solution that restored peace of mind and helped preserve the home’s roof system, backed by a 5-year warranty.